I’m trying to automate my dumb roomba. For this I ideally need a couple of buttons. I’m lost at how to add another button, that would have a different name and a different sent byte.

Additional question - to get info from the roomba (charging, battery, etc.) I need to send a similar byte series and then receive two unsigned bytes. I have no idea how to do that.

Roomba documentation: https://efcms.engr.utk.edu/ef230-2021-01/projects/roomba-s/create_2_Open_Interface_Spec.pdf

  • CameronDev@programming.devEnglish
    3·
    6 months ago

    I cant test this, but should it be something like:

    # Example button configuration
button:
  - platform: template
    name: Livingroom Lazy Mood 1
    id: my_button

    # Optional variables:
    icon: "mdi:emoticon-outline"
    on_press:
      - logger.log: "Button 1 pressed"
  - platform: template
    name: Livingroom Lazy Mood 2
    id: my_button2

    # Optional variables:
    icon: "mdi:emoticon-outline"
    on_press:
      - logger.log: "Button 2 pressed"

    As for the other thing, that might be something you need to write your own driver for? if you need some inspiration, this repo has a driver for mitsubishi heatpumps, which does something similar (read/write to a uart): https://github.com/echavet/MitsubishiCN105ESPHome

    • Shimon@slrpnk.netOPEnglish
      2·
      6 months ago

      Thank you! This worked perfectly. And thanks for the link, will look into that