Edit: ideally wifi cameras that I can solar power.
Looking to replace my Arlo cameras with something self-hostable. Arlo lets you store on a USB stick, but there’s no way to get out from under their cloud, which gets more expensive all the time.
You must log in or register to comment.
You can use pretty much any camera with ZoneMinder as long as it supports ONVIF or RTSP and has the right connectivity and power inputs for you. I did something similar with some cheap TP-link cameras with pretty good results. With motion activated recording, I have just shy of 12 month of recordings stored on a 500G SSD.
Many selfhosted NVRs have been suggested. Personally ive tried:
iSpy
Frigate
Zoneminder
Shinobi
Ended up settling on zoneminder at this stage.
For cameras themselves i just want to point out the OpenIPC project - opensource firmware if youre technically inclined
Edit: I’m hesitant to recomment OpenIPC now since the main streamer is closed source. Thingino is fully open and developed by some of the devs who didn’t agree with the closed source portion
Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I’ve seen in this thread:
Fewer Letters More Letters AP WiFi Access Point IP Internet Protocol IoT Internet of Things for device controllers NAS Network-Attached Storage NVR Network Video Recorder (generally for CCTV) PoE Power over Ethernet SSD Solid State Drive mass storage SSH Secure Shell for remote terminal access Unifi Ubiquiti WiFi hardware brand VPN Virtual Private Network
10 acronyms in this thread; the most compressed thread commented on today has 9 acronyms.
[Thread #289 for this sub, first seen 18th Nov 2023, 23:15] [FAQ] [Full list] [Contact] [Source code]
UniFi
I personally recommend against UniFi for security now. Their software just isn’t great anymore, and you can’t really “selfhost” the protect. You have to have one of their proprietary boxes hosting the protect software. I’m not 100% against that - but I was not aware of that when I bought the first camera and had to buy the box.
As for the software, it’s honestly just buggy and laggy. I’m in their system now, but if I could do it all again I’d look at others.
You have to have one of their proprietary boxes hosting the protect software
This was the biggest bummer for me that convinced me not to get into the Unify ecosystem. I already have a robust storage solution at home, I just want to point the cameras to a docker container running on my host with all the storage.
Eufy? With the hub it’s all kept local I believe. Even without I think you can get a week with a 128 card.
