There were 40,000 PI4s a week produced during Covid, the shortage on the consumer websites was because the entire production was sent to industry users, and there was the barest dribble left over for the hobbyists that made them popular.
Every time there was an increase in production, it all went to shore up backlogs in industrial orders. Why an industry player would use an rPi instead of purpose-built PLCs is beyond me, but that’s what was happening.
The rPi foundation will drop hobbyists like a hot potato when the 5s start being specced for industry and we’ll be back to the same shit. Pretty sure that’s why they didn’t bother with H265 hardware licensing, because no industry player will need that.
TL;dr - They’re going to fuck you, find another source.
I deal with both PIs and PLCs for a living. I don’t have much faith in the future of PLCs to be honest. They just don’t seem to be willing to move forward in any sense of the word. The price for the same hardware tracks inflation, the lead times are getting worse, no version control, no higher level code development, still struggling over basic driver stuff, almost no interoperability, basic things that are wrong aren’t getting fixed, almost no code sharing, everything locked down…
Basically they fit 1994 and decided to just stay there. The only good stuff they offer is greater reliability and more I/O. Right now I can buy an HMI-PI-PLC that can do everything my old systems can do and more for lower cost.
As far as guys I know that do industrial MMI, it’s PLCs all the way down for reliability. They’d desperately like to avoid the Siemens and ABs of the industry, but nobody ever got fired for buying those and they cratered. Which they do, no doubt, but I wouldn’t be trusting much to a hobbyist SBC.
Basically your argument is of the form: IBM is the best and there is no future in the desktop. No one is going to want to have to buy software from multiple vendors. They want the same guys who made the hardware, to make the OS, and to make the software.
You have no idea how frustrating it is to deal with companies like Rockwell and Siemens. From endless tech support licenses, to special cables, to refusing to support any new features, to lockdown down protocols. I can share my python code with anyone, not my compactlogix code. Every single sin of the tech industry you can name these guy implement.
Eventually they will lose. Eventually the PLC will either become like every other embedded dev platform or get replaced by ones that are.
Also, fuck having to deal with stl and ladder logic, if the industry minded towards more common languages and frameworks, you wouldn’t need to have mechanical engineers learning plc programming, you could have actual developers working on it.
Every second that I had to spend on software like tia portal drove me further and further away from industrial automation
I had to get a CRC done in ladder once and this is my goto (hehe) war story.
Be easier to teach the mech-es I work with python. “Ok I setup some free software on your computer. Go find some tutorials online and follow it. Let me know if you get stuck” vs "alright I offered one of my children to our Rockwell Sales rep who is cough…working…cough from home. He has agree to give us a 30 day license as part of our Faustian bargain. I talked to IT and we think we can get it on the license manager sometime this week. Did you setup an account on the Rockwell site so you can read tutorials? No? Ok get on that. It has surprisingly complex password rules and requires the account manager to setup your account.
When that is done I will build you a 2 or 3 thousand dollar test system so you can test code. No there is no simulator you should trust you need physical hardware. Did you install the Studio 5000 software? Shit you installed the old version. Rslinx is broken now. Fuck fuck. Ok I can fix this, we just need to delete the old Rslinx and make sure the registry is clear. After a day or so…
Ok so download Studio 5000 from Rockwell, make sure you get firmware release 33. Yes they have updated firmwslare 33 times. That should make you very confident. Now I want you to follow good coding practices as you learn. Unfortunately since no one is legally allowed to share code and even if it was legal it would be near impossible good coding practices are defined by whomever old timer teaches you. Which is me, hi. What you don’t want to learn from one flawed imperfect person you want to have an entire community sharing, growing, creating together? Hehe stop you are killing me.
Oh you are getting a weird error code? Go tell Rockwell. You can’t email them. You have to call them. Use the direct dial numbers and you might reach someone within the hour who might know how to fix it. Or you can bother me and I will check my to see if my dead tree notebook has the answer."
You people think I am exaggerating, I really am not. I am understating how truly messed up it is. I do not know any controls engineer who are fully sane and not addicted rageaholics.
There were 40,000 PI4s a week produced during Covid, the shortage on the consumer websites was because the entire production was sent to industry users, and there was the barest dribble left over for the hobbyists that made them popular.
Every time there was an increase in production, it all went to shore up backlogs in industrial orders. Why an industry player would use an rPi instead of purpose-built PLCs is beyond me, but that’s what was happening.
The rPi foundation will drop hobbyists like a hot potato when the 5s start being specced for industry and we’ll be back to the same shit. Pretty sure that’s why they didn’t bother with H265 hardware licensing, because no industry player will need that.
TL;dr - They’re going to fuck you, find another source.
I deal with both PIs and PLCs for a living. I don’t have much faith in the future of PLCs to be honest. They just don’t seem to be willing to move forward in any sense of the word. The price for the same hardware tracks inflation, the lead times are getting worse, no version control, no higher level code development, still struggling over basic driver stuff, almost no interoperability, basic things that are wrong aren’t getting fixed, almost no code sharing, everything locked down…
Basically they fit 1994 and decided to just stay there. The only good stuff they offer is greater reliability and more I/O. Right now I can buy an HMI-PI-PLC that can do everything my old systems can do and more for lower cost.
As far as guys I know that do industrial MMI, it’s PLCs all the way down for reliability. They’d desperately like to avoid the Siemens and ABs of the industry, but nobody ever got fired for buying those and they cratered. Which they do, no doubt, but I wouldn’t be trusting much to a hobbyist SBC.
Basically your argument is of the form: IBM is the best and there is no future in the desktop. No one is going to want to have to buy software from multiple vendors. They want the same guys who made the hardware, to make the OS, and to make the software.
You have no idea how frustrating it is to deal with companies like Rockwell and Siemens. From endless tech support licenses, to special cables, to refusing to support any new features, to lockdown down protocols. I can share my python code with anyone, not my compactlogix code. Every single sin of the tech industry you can name these guy implement.
Eventually they will lose. Eventually the PLC will either become like every other embedded dev platform or get replaced by ones that are.
Also, fuck having to deal with stl and ladder logic, if the industry minded towards more common languages and frameworks, you wouldn’t need to have mechanical engineers learning plc programming, you could have actual developers working on it.
Every second that I had to spend on software like tia portal drove me further and further away from industrial automation
I had to get a CRC done in ladder once and this is my goto (hehe) war story.
Be easier to teach the mech-es I work with python. “Ok I setup some free software on your computer. Go find some tutorials online and follow it. Let me know if you get stuck” vs "alright I offered one of my children to our Rockwell Sales rep who is cough…working…cough from home. He has agree to give us a 30 day license as part of our Faustian bargain. I talked to IT and we think we can get it on the license manager sometime this week. Did you setup an account on the Rockwell site so you can read tutorials? No? Ok get on that. It has surprisingly complex password rules and requires the account manager to setup your account.
When that is done I will build you a 2 or 3 thousand dollar test system so you can test code. No there is no simulator you should trust you need physical hardware. Did you install the Studio 5000 software? Shit you installed the old version. Rslinx is broken now. Fuck fuck. Ok I can fix this, we just need to delete the old Rslinx and make sure the registry is clear. After a day or so…
Ok so download Studio 5000 from Rockwell, make sure you get firmware release 33. Yes they have updated firmwslare 33 times. That should make you very confident. Now I want you to follow good coding practices as you learn. Unfortunately since no one is legally allowed to share code and even if it was legal it would be near impossible good coding practices are defined by whomever old timer teaches you. Which is me, hi. What you don’t want to learn from one flawed imperfect person you want to have an entire community sharing, growing, creating together? Hehe stop you are killing me.
Oh you are getting a weird error code? Go tell Rockwell. You can’t email them. You have to call them. Use the direct dial numbers and you might reach someone within the hour who might know how to fix it. Or you can bother me and I will check my to see if my dead tree notebook has the answer."
You people think I am exaggerating, I really am not. I am understating how truly messed up it is. I do not know any controls engineer who are fully sane and not addicted rageaholics.