Hey-ho 👋

What is the best approach for selfhosting an email server with static IP or blocked port 25?

I’ve done it many times in many different ways, now doing it again and want to hear what is the best approach these days

My port 25 isn’t even probably blocked, I just prefer to use my vps to help it with this stuff

Any suggestions?

  • PlexSheep@feddit.de
    link
    fedilink
    English
    arrow-up
    9
    arrow-down
    1
    ·
    edit-2
    6 months ago

    Hosting email with mailcow dockerized worked pretty good on my netcup vps, but before you go into hosting email ask yourself a few questions:

    • Will you use your selfhosted mail for important things? (Banking, official correspondence and so on)
    • Can you promise a near 100% uptime? Otherwise, some email might not reach you.
    • How important is the Mail you send? Some (stupid) Blocklists generally block all IP ranges that are sold out by vps companies and other kinds of IAAS.
    • If you register any accounts with your selfhosted mail, can you guarantee yourself that your email account is secure? Don’t underestimate what an attacker can do with a compromised Mail account.

    I personally ended up scrapping my email server eventually. Nowadays I pay a company to do the mail hosting, you just need to set some DNS records and they do everything else. Personally, I’m with proton, but there are many good alternatives.

    • mvirts@lemmy.world
      link
      fedilink
      English
      arrow-up
      4
      arrow-down
      1
      ·
      6 months ago

      Ya I had to bail on hosting email, getting off of block lists and verifying that people even get your outbound email is near impossible at this point.

    • Gooey0210@sh.itjust.worksOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      6 months ago

      As i said i already have experience of hosting email, many different ways, etc

      Will you use your selfhosted mail for important things? (Banking, official correspondence and so on)

      I’m barely using email because have really few services that require an email (foss and selfhosting evangelism)

      Can you promise a near 100% uptime? Otherwise, some email might not reach you.

      I can promise you anything under these stars. And some of it would be true because my specialization is 0 downtime systems

      How important is the Mail you send? Some (stupid) Blocklists generally block all IP ranges that are sold out by vps companies and other kinds of IAAS.

      Never had any problems with the big hosters like do, linode, vultr, hetzner

      If you register any accounts with your selfhosted mail, can you guarantee yourself that your email account is secure? Don’t underestimate what an attacker can do with a compromised Mail account.

      Selfhosting for many years, never got hacked because I take security seriously

      Nowadays I pay a company to do the mail hosting

      I’m trying not to pay companies when not necessary, and especially not for a “setup service”

      • PlexSheep@feddit.de
        link
        fedilink
        English
        arrow-up
        1
        ·
        6 months ago

        Alright, you seem to have a good grasp on what you’re doing. Good luck have fun. I really hope it works for you.

  • originalucifer@moist.catsweat.com
    link
    fedilink
    arrow-up
    6
    ·
    edit-2
    6 months ago

    email is one of the only services i just gave up on (after rolling my own exchange for over a decade). its too annoyingly complex, tedious to do correctly for just yourself. its not worth it.

    • Gooey0210@sh.itjust.worksOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      6 months ago

      I do it not really for myself, slow and steady i’m converting everyone I know to using my services

      Sounds impossible, but some people already are using almost the whole suite and are happy. More and more people are asking if they can join.

      The global sentiment is moving towards “tired of google”, “tired of paying for bad services”

      • chiisana@lemmy.chiisana.net
        link
        fedilink
        English
        arrow-up
        2
        ·
        6 months ago

        Self hosting email on non-mission critical domain for learning purposes might be okay if your intention is to get into the industry. Self hosting email for others on more production like setting you’re going to find yourself in a world of pain.

        All it takes is one missed email (be it not making into their intended recipient’s inbox, or them not receiving an important notice in their inbox) and you’re never going to hear the end of it.

        You’d also be liable for content your users send out from your servers — and I don’t mean the spam type, though if you get your IP blacklisted, your provider may want to have a word with you.

        I’d strongly advise against going down this path, but if you do, be sure to have ways to legally shield yourself from any sort of potential liabilities.

  • TCB13@lemmy.world
    link
    fedilink
    English
    arrow-up
    3
    ·
    edit-2
    6 months ago

    You can selfhost the email server wherever you want. But you’ve to use some external system to deliver the email or you’ll end up in spam because your residential IP is most likely dynamic and already flagged by most email providers.

    One way to do it is to get a VPS somewhere and setup Wireguard on it. Then configure your local system to bind to the Wireguard interface and IP so all email send and received using the tunnel. Dovecot doesn’t care what interface it is running on, Postfix has specific options that you can change in master.cf to accommodate the fact that it will be binding to the VPN IP and the real IP is the VPS public IP.

    1. Setup a install of Dovecot / Postfix / Rspamd on your local server: https://workaround.org/ispmail-bookworm/
    2. Start by setting up a Wireguard tunnel between your local server and the VPS: https://www.digitalocean.com/community/tutorials/how-to-set-up-wireguard-on-ubuntu-20-04
    3. Create a outgoing transport for the email that uses the WG tunnel and is aware of the VPS public IP:
    out-wg      unix  -       -       n       -       -       smtp
     -o proxy_interfaces=188.xxx.xxx.xxx # the real public IP of the VPS
     -o smtp_bind_address=10.0.0.2 # the IP that your local server has on the WG interface
     -o inet_interfaces=10.0.0.2 # same as above
     -o myhostname=server.example.org # should match the PTR / reverse DNS entry on the VPS IP
     -o smtp_helo_name=server.example.org # should match the PTR / reverse DNS entry on the VPS IP
     -o syslog_name=smtp-wg
    
    1. Set your VPS firewall to NAT/forward incoming traffic on port 25, 587, 465 and 993 to the local server (wireguard client 10.0.0.2);
    2. Change main.cf to use the transport by adding: default_transport = out-wg.

    That’s everything you need to get it going. Use https://www.mail-tester.com/ to debug if DKIM and everything else is properly setup at the end.

  • TheInsane42@lemmy.world
    link
    fedilink
    English
    arrow-up
    2
    ·
    edit-2
    6 months ago

    I’ve setup my email via a VPN to my own server.

    • DNS, mail, business web, cusromer web on VPSes (2, 1 primary, 1 secondary DNS only)
    • Personal email, incoming and outgoing via VPS, personal websites (all static) on local system (RPi 4 8GB)

    This gives the advantage that your outgoing email always comes from the VPS ip address (pick a VPS provider that is trusted) and when your line is down, incoming email is cached on your VPS. It’s a tad of double work, but pretty secure. Even connecting to my employer to work from home is not a big issue. (and that connection is limited to it’s own vlan)

    Also, with this method, you can route the mail into your network via port 26 when 25 is blocked or even set an outgoing vpn to your VPS and route the email that way. You’ll be provider independent at home. (I even have a private ipv6 /48 via a tunnel broker)

    You’ll need to work a lot on your knowledge though, without DNSSEC, SPF, DKIM and DMARC the big 2 (Google and hotmail) will refuse your email.

  • atzanteol@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    1
    ·
    edit-2
    6 months ago

    I think mail forwarders are still a good way to go. It’s hard to predict how Internet providers will react to email running in their networks.

    These days I have an ec2 at AWS for my mail server and use SES for outbound mail. I’m thinking of moving “receiving” back into my network with a simple chat forwarding service but keep SES for outbound. They handle all the SPF and DKIM things and ensure their networks aren’t on blacklists.

    • bartolomeo@suppo.fi
      link
      fedilink
      English
      arrow-up
      1
      ·
      6 months ago

      react to email running in their networks.

      Is email dangerous? (I have no idea how email works so please don’t bombard me with acronyms)

  • TheHolm@aussie.zone
    link
    fedilink
    English
    arrow-up
    1
    ·
    6 months ago

    Do not try to host outbound mail on residential IP blocks, delivery will be really bad. Cheap VPS is same story. You best bet is VPS from some not well know provider, they may be avoid to be in blacklist in M$ and Google. Inbound mail is fine anywhere as so long as you can have port 25 open. DDNS works too.

  • Decronym@lemmy.decronym.xyzB
    link
    fedilink
    English
    arrow-up
    1
    ·
    edit-2
    6 months ago

    Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I’ve seen in this thread:

    Fewer Letters More Letters
    DNS Domain Name Service/System
    IMAP Internet Message Access Protocol for email
    IP Internet Protocol
    NAT Network Address Translation
    POP3 Post Office Protocol v3, for email; contrast IMAP
    RPi Raspberry Pi brand of SBC
    SBC Single-Board Computer
    SMTP Simple Mail Transfer Protocol
    VPN Virtual Private Network
    VPS Virtual Private Server (opposed to shared hosting)

    9 acronyms in this thread; the most compressed thread commented on today has 10 acronyms.

    [Thread #461 for this sub, first seen 29th Jan 2024, 13:05] [FAQ] [Full list] [Contact] [Source code]