Wouldn’t it be good to have the truth during investigations?

Well, yeah, but the mind is fallible. That’s why eye witness testimony usually only gets a case so far, people tend to forget specifics and fill in the gaps without realizing they did.

In the gaming world, for example, MSI announced this year a monitor with a built-in NPU and the ability to quickly show League of Legends players when an enemy from outside of their field of view is arriving.

…So it just lets them cheat? I remember when monitor overlay crosshairs were controversial, this is insane to me.

Lmao timers are essentially the only thing I use Bixby for, how did they manage to fuck this up so bad??

I didn’t print a mask but I did join in on a city wide effort to make ‘ear savers’ and give them away free for hospital and other essential workers. I do wonder how many of the ones I made got used, I wasn’t too fond of the design and found a better one a month later but by that point they had tens of thousands and weren’t accepting more.

My roommate from a year ago was adamant CCleaner was required for his PC to keep running. In 2023. I was just shocked to see it was still even a thing.

I enjoy that the character that can break a lot of things is called the “non-breaking space”.

I just went through this process when I got a Dreame D10 Plus which has an identical root process as the L10s a few weeks ago with the intent of putting Valetudo on it. I ended up trying but failing after one of the header pins I was trying to flash it with broke off in the machine. If you are brand new to this stuff, personally I wouldn’t recommend trying it. If you still want to try, do not update the robot once you get it and either buy one of the programming boards or at the very least have some 2mm pitch header pins around (standard in NA is 2.54mm). I really wanted to run mine locally as well (don’t like the idea of someone gaining access to a full lidar map and remote controlled camera in my house) and hope in the future an easier method is discovered. I don’t know about the base station for each floor thing, I do know that Valetudo only supports a single map. From what I understand that means you’ll have to re-map each floor before cleaning. If you only want Home Assistant intergration there is a HACS intergration for Dreame that allows for multiple maps. You used to have to jump thorough some hoops and use it with Xaomi cloud or something but the newest beta allows sign-in using the Dreame app credentials.

It sort of sounds like a resonance thing to me. If you try speeding up or slowing down the print and it stops making that noise, it’s most likely resonance. Are you able to get an idea of where the noise seems to be coming from? Like the gantry or base, etc. I also know people have been putting automotive sound deadener inside the enclosure on the bottom panel as it seems to make a lot of noise from resonance.

The tension adjustment on that extruder isn’t the greatest and the best fix in the long run would be upgrading it to a better design. But in the mean time, I find there’s sometimes a bit of slop in the extruder mounting to the stepper. If you loosen the screws that secure the extruder to the stepper you may be able to move the extruder assembly in a way that gives the filament more space between the gear mounted to the stepper shaft and the pinching gear on the extruder arm. Yymv, sometimes theres a bit of play and sometimes theres not but it could help.

Yeah, its a bit of a pain if thats what it requires. Luckily none of the ones I’ve worked on so far have been off by more than a millimeter across the bed and thats acceptable to me (at least for where these machines are going) for bed leveling to do the rest so I havent opened up the bottom on any yet. Solid machines printing wise though! Been incredibly impressed so far despite hit or miss reviews online, only failed prints I’ve had are from met arranging models poorly. And no worries, best of luck with the machine!

Ok, I can’t really confirm this for sure as these machines have to be delivered later today and I can’t go taking them apart, but I took a look at our K1’s and my guess is no. I think the grub screws you see in the case are for collars that keep the lead screws at the correct height, with no motor below there’s nothing else to stop them moving down. To adjust the bed level you’d have to loosen off the set screws that the sync T belt uses and thats only accessible from the base.

I have the CR Scan Lizard but have only used it for a few scanning jobs so far. Anything reflective causes a lot of issues with the scan but I was able to get some decent quality scans of my face, my hand, and a few other random objects I tested it on. Knowing how it performs now, I wouldn’t have paid full price. I feel the hardware is okay but the software is what holds it back, no alternative software that works with it either to my knowledge.

Yeah thats weird, I was thinking instead of recalling the mesh it was re-running it instead. It may still be from that but I figured the pre-sliced test files would work fine if that were the case. I’ve set up about 10 S1 Pro’s at this point and haven’t encountered that before. As someone else mentioned it may be worth looking into aftermarket 3rd party firmware options. If its not a gcode issue that leads me to think its something with the printer firmware. At work right now but let me know if you need any help and I’ll try to reply tonight.

This sounds like it could be a start gcode issue. What slicer are you using and did you use a preset profile or set it up yourself? Have you tried printing with the included test files that were on the SD card, and if so, did it start correctly?

Yeah, I like having cameras but don’t want that video being sent elsewhere. I ended up getting Tapo cams which are cheap cloud cameras but they also have RTSP streams and local username / password settings. That means I can send the footage to a locally hosted NVR and lock the cameras behind a parental option in my router that blocks all external in and out communication to them.