My personal hatred of Core XY not withstanding that sounds like an awesome idea. Belt printer? Maybe at a 45 degree slant to avoid support and overhang issues?
My personal hatred of Core XY not withstanding that sounds like an awesome idea. Belt printer? Maybe at a 45 degree slant to avoid support and overhang issues?
DMG Gameboy Kirby Dreamland. My youngest loves it and it’s REALLY hard to lose so he doesn’t need a ton of help.
Yeah, logical volumes has a teeny bit of overhead, same with RAID. both together means you can run older things but things that have a lot of textures loading you will see some drop.
Logical volumes. it slows down IO on this setup but i don’t run IO intensive games. It allow me to just repartition and add drives as needed.
Bit of both really. Ok, the bed tramming is normal, even GREAT printers need it done every few weeks or so. The physics and mechanical properties of how the bed is held down mean changes in temperatures and normal shifts even in an ACed house mean they loosen naturally a little every day and after a few weeks they will be bad enough someone who likes a really level bed will need to clear them again. After a few months any bed that isn’t welded down is going to need to be redone.
Z offset and bed auto level follow from that. You need to redo them when you do the tramming anyway.
I would say run your printer more often but that won’t fix it. You’re running against physics and nothing can stop that. Maybe you can store up prints for say 6 months and then do them all in a week or so and you only have to do this once?
The piece probably left the build plate and stuck to the nozzle, got pushed in and melted. OP got lucky and it didn’t hit anything hard and cause his leveller to break.
Primary: Artillery Sidewinder X1, absolutely stock except for parts that needed replacement but even those are just part swap, no upgrades or mods.
Secondary: MP Select mini Frame and some motors. The board is the motherboard form a Tronxy X5S. the bed is a manual replacement from an off brand and it has an off the shelf 12 V 300W PSU.
I will gladly open a new roll mid print and continue a print with an untested roll. I simply don’t print things that need that level of fiddling.
I personally hate it for how screamy everyone gets when they play it but there’s an stl for a portable secret hitler game.
Call us when you revive thinkgeek and sell it to somone who will make something of it