People that are running a windows modified to disable the hardware eligibility checks are probably also disabling/deleting the telemetry and activation checks.
Microsoft doesn’t want you to use windows 11, they want your money and data.
People that are running a windows modified to disable the hardware eligibility checks are probably also disabling/deleting the telemetry and activation checks.
Microsoft doesn’t want you to use windows 11, they want your money and data.
We are already having wifi 6 routers being replaced with 6e capable ones.
Just don’t ask about how few of the devices used actually support 6ghz.
Somehow more than 5 ish seeders are usually enough for it to start playing within seconds. But im mostly watching episodes as they come out and 1k+ seeders is usual.
Not really a problem if you have decent enough internet and already use a vpn for other purposes but yes.
Or just use the torrentio plugin, no real debrid
Best way for pi alternatives I’ve found is to see which one is the most popular for the project / community I’m working with.
It isn’t always the latest and greatest but at least there will be plenty of support.
Why pick him up? You could probably hop on and ride away in case of an emergency.
Even with a fully debloated windows there is still an EdgeWebView or 2 hiding somewhere.
Putting up with the ads or putting up with the workarounds?
Since I’ve been running debloated windows since win 7 it has never bothered me to run a few scripts after install or use a modded iso. But if that wasn’t an option I’m not sure if the last few games holding me to windows would be enough.
Idk my limbs don’t rotate 360° degrees, At least not multiple times. Unless yours do he has us beat on something.
Which then gave us orcaslicer (fork of bambu) which has been a godsent for having my mainsail UI in the slicer itself.
That’s about the same as it costs them to run 30h of 1080p streaming to 100k people.
It’s a drop in the bucket, and one they aren’t even going to pay.
ASA and ABS definitely do better at elevated chamber temps. What temp is enough I can’t say but I still saw improvements when going from 50 to 70c. Higher temps also let you use more fan speed without the added risk of warping so you’ll probably see better overhangs even though the temps are higher.
Id start with adding some chamber temp sensors first so you can measure what difference you are making with the other mods.
Using 4 mm abs panels I saw about a 15c improvement by just throwing a fleece blanket over the printer, so that might be an easy fix if you don’t print large parts frequently. Although higher temps are also great for layer adhesion on smaller parts.
Yeah ridga or vzhextrudort style gears definitely help greatly. You could do a mihai style test to see if the artifacts on the i3 are mostly extruder related or from the XY motors.
Tuning drivers consistently for quality is going to require an oscilloscope, although there are some experiments with attaching an accelerator to the motor while doing a frequency sweep.
Of course you could just change settings and see if there is a visual difference, but there are too many settings and combinations to make that realistic.
What chamber temp are you using for such a large part? I’d recommend at least 70+C but that might be hard to reach with acrylic panels.
Your bed will also warp due to the heat since its rigidly mounted.
Surface quality is also driver (+ driver settings) and motor related, and even the combination of them.
This actually works way better than people expect. Many authors are tied to a publisher but are still allowed to personally give away copies to students.
It’s Austrian German, so close enough to Dutch at times I guess.
My SanDisk usb A/C dual 64gb has been abused for quite some time and still works perfectly. Hosted a portable windows install so I could test pcs and has probably transferred more than 2tb of GoPro footage sofar.
ALT+F4 for free funds, opened alot of slots on bfh servers whenever my friends couldn’t join.