Yeah the nodered flow on the target device is for handling shutdown(sleep) and status reporting back to HomeAssistant, so in HA the computer is a simple switch with on/off states

Oh neat!

I made a custom solution for WOL and remote shutdown using nodered and MQTT, but this is so cleaner than maintaining a custom solution

This happens when a small project has 12 developers each scratching their own itch in their own time, not a team of 120 developers getting paid to work on the same itch 8 hours a day.

In the case of FreeCAD they’re actually starting to reign in and focus more now, and there are more contributors.

Instead of one super chunky battery, how about a laptop with replaceable batteries, in combination with a UPS?

UPS is so you can actually replace the laptop battery with a spare one , even during a power outage. Just run the laptop on AC from the UPS while changing batteries. Or see if you can find a UPS with a long lasting battery. Entry level ones only have like 15-30 minutes of battery life though, since they’re more intended for safe shutdowns or brownouts.

Probably more what MangoKangoroo and B0rax talked about, that enterprises can opt out of this telemetry, due to compliance or Intellectual Property protection.

So only the commoners get mandatory full-scale surveillance, Ehm I mean “ai enhancement”

I hope you’re joking about rebooting to Windows for paint 😁

But just in case, and for the benefit of others: KolourPaint

It’s basically KDE Paint, and works great as a simple image editor

I’m in this picture and I don’t like it

Yeah Track&Graph is great. I also use it for tracking exercises and weight, and just use the built-in graphs to see the trend over time

I third Proxmix

I run most stuff as Docker images inside a VM, but also a few services as LXC containers and some non-docker stuff in other VMs

The biggest problem with Discord is that its an information black hole. Its not properly searchable and not indexed by search engines.

Discord is fine for casual chat, but horrible when used for forum-type discussions and even worse when used for documentation.

You see the same problems being discussed and solved again and again, but you cant just “link” someone the solution like you could with a forum thread cause its spread out over 3-10 chat messages that are interleaved in-between other topics being discussed in the same room

Anything of long-term value for the project (forum-type discussions, documentation etc) should not recide in Discord

With everything stored in a single file, does that mean you need to close Treedome on ComputerA before it can by synced to ComputerB?

If computerA makes an edit in one note while computer B makes an edit in another note, does that create a sync conflict? (Assuming syncing with Nextcloud, syncThing or similar)?

People often rode them on sidewalks posing a danger to people walking.

I’ve seen this sentiment around, but where else are you supposed to ride eScoooters and bicycles? Of course ideally they belong in the bike lane, but most places don’t have bike lines, so the alternatives are sidewalks or in the road with cars.

If we’re gonna get people out of cars, we need to recognize that walking+transit doesn’t work for everyone a lot of people and that a bicycle/ eScooter is the solution (look at Amsterdam/ Copenhagen how well bicycles work) , but bike lanes don’t get built overnight, especially when few people cycle, if their banished from the safe sidewalk and only allowed to cycle in the dangerous road.

(I’ve lumped bikes and eScooters together since they both solve the same problem of rapid personal transport, both having speeds of 20-30 kph which is significantly more than pedestrians but less than cars)

+2 for KDE Connect, the integration is amazing. I’ve used it on KDE and Gnome (gsconnect), all works very well

How much of this is Spotify’s fault and how much is the major record labels sitting between Spotify and the individual artists?

And is there a better place for us consumers to go and vote with our wallet? Ideally somewhere that isn’t one of the 5 major tech giants that control everything

Like taiyang said, SteamOS is based on Arch which is super not newbie friendly, but the desktop modes “desktop environment” is KDE which available on pretty much any Linux distro, including beginner friendly ones like (K)Ubuntu and Fedora (although I’m not sure how beginner friendly Fedora is, regarding proprietary drivers and codecs)

Depending on what you need, you might get away with any old small PC (like 1 litre office PCs or old thin clients), or an SBC like Raspberry Pi.

For Operating system, instead of Android, try LibreELEC, or any Linux distro starting straight in to Kodi could work, for Firefox in Kiosk mode opening your Jellyfin.

Bazzite is a version of Fedora initially started as a steamOS alternative for the steam deck. So if you install the Deck version of Bazzite it boots straight in to Steam Big Picture intended for the TV.

KDE Plasma also has a Plasma Big Screen version, but I’m not sure how ready that is yet, or if it’s easy to install.

That’s very strange, which distro and GPU was this? So I don’t recommend that to anyone?

I’m assuming the GPU in question was Nvidia, since AMD and Intel make their driver opensource and baked in to the kernel. Sadly nVidias latest kernel (535) has been troublesome, so I’m still on the previous 525. nVidia is about to release 545, which looks to be very promising.

Luckily on Ubuntu changing driver is as easy as opening the Additional Drivers application, selecting the driver version, hit apply and reboot. PopOS, Bazzite, and a few others comes with Nvidia drivers preinstalled.

Best of luck if you try again in the future

Cheaper? :O This is the super-deluxe splurge option compared to some cheap IKEA ZigBee bulbs

Got any recommendations? ZigBee, Zwave, or something else?

One nice thing about having the bulbs smart is changing the color temperature. Is there any way of doing that from the wall-switch? It’s kinda what’s been stopping me from upgrading from smart bulbs to smart switches

Like others said it's mostly just practice.

What helps is to align the (short) ends and hold them flat between your index finger and thumb. Use your free hand to get them in order. Once they're in order, keep holding them still between your index finger and thumb using one hand, then use your free hand to slot on the connector

Edit: also bending them back and forth a bit will soften them up and reduce them curling in all sorts of directions. It also weakens them, so don't overdo it (mostly only works for solid cable, the type meant for permanent installations like inside walls)

What's the deal with the timezone?