It looks like she is holding a pistol.

All good! It’s the same situation as I described and I see that increasing temps did help. It’s good to do a temperature tower test for quality and also a full speed test after that. After temperature calibration, print a square that is only 2 or 3 bottom layers that covers the entire bed at full speed or faster. (It’s essentially a combined adhesion/leveling/extrusion volume/z offset test, but you need to understand what you are looking at to see the issues separately.)

If you have extrusion problems, the layer line will start strong from the corners, get thin during the acceleration and may thicken up again at the bottom of the deceleration curve. A tiny bit of line width variation is normal, but full line separation needs attention.

Just be aware if you get caught in a loop of needing to keep bumping up temperatures as that starts to get into thermistor, heating element or even some mechanical issues/problems.

Report it. (New account, blog spam, funky domain, poorly configured server, etc.)

185C is cold for PLA. It may work for slow prints, but my personal minimum has always been around 200C and my normal print temperature is usually at 215C.

Long extrusions are probably sucking out all the heat from the nozzle and it’s temporarily jamming until the filament can heat up again.

Think of the hotend as a reservoir for heat. For long extrusions, it will drain really fast. Once the hotend isn’t printing for a quick second, it will fill back up really fast. At 185C, you are trying to print without a heat reservoir. I mean, it’ll work, but not during intense or extended extrusions.

Cool. I didn’t want to suggest a disassembly if someone didn’t realize that wire likely coming out of the top of the tube wasn’t there to be a convenient handle.

CRTs are one of the few electrical devices that scare me, actually. It’s not that bad, but I choose to maintain a healthy level of fear in that regard.

Have you ever disassembled a TV before? It wouldn’t hurt to give the VCR a good cleaning and check-up.

If you haven’t disassembled a TV before, that CRT will still be likely holding a hell of a charge so read up on safety steps first.

Just call it X-Twitter. It ain’t twitter any more, and “X” is just dumb as fuck.

I remember they finally were able to make a ball point pen all by themselves in 2017.

When I actually start seeing products that aren’t contaminated with fake ICs or are actually grounded properly without hyper-strict foreign supervision, I’ll change my tune. Until then, there isn’t an article in the world that will convince me that China is actually innovating or taking steps to make quality products.

What the hell are you popping off about? All you need to do is go to Amazon or Ali Express to see the absolute plethora of Chinese product clones. Just search for a 3D printers, as a good example.

Yeah, I guess I am a bit prejudice against the bulk Chinese electronic garbage that is usually an extreme fire hazard. Maybe it’s all the fake or counterfeit chips I have had to replace that has pissed me off.

Look bub. I don’t give a flying fuck about China or the politics involved. Their manufacturing sucks ass and their actual their innovation is rare. If they copied products correctly, I would have a bit more respect for their business model.

If you want to go all-out tankie on people, maybe you should go back to your own instance.

That’s great and all, but you missed the theme of this thread.

China has been the king of bulk products for years. Saying that recent investments will alter world politics in 25 years is a bit strange. Saturating markets is what China does best.

There is a bit more history behind TSMC. You left out the bits where they partnered with other companies, like Philips, that gave them access to proprietary information. They continued building relationships with other large companies and investing back into their own business.

China isn’t doing that. China has had access to older fab equipment for years but still fails to truly innovate. If US companies could trust China enough not to steal modern tech, there could be some real benefits to having fabs in China. The world kinda figured out never to send proprietary information to China years ago. Companies still do and doesn’t take long for a thousand clones to pop up on Ali Express shortly after.

Trains are one thing, modern chip fab is a completely different. Buying older equipment is not going to get them anywhere but into the production of chips that have been on the market for 10 years already.

This is one industry where each generation has hard limits for manufacturing.

But they are buying mature-node equipment, says the article. That doesn’t mean shit other then more cloning and counterfeiting.

Future chips not affected by THIS cpu bug yet.

1. do_gro
2. get_si
3. ? page
4. …
5. Profit.

deleted by creator

deleted by creator

deleted by creator

deleted by creator

deleted by creator