Oh that looks cool, is this to stamp things you’re making or just playing with it for fun?

I do vaguely remember something about it getting changed, but yeah, as you said unless you’re sharing it with a bunch of people, it’s probably not enough to trigger anything on their side anyway

I think theres a nice variety of methods out there now that there’s no “one right way” to do it which I think is great compared to just a few years ago where your only real options were a reverse tunnel or CloudFlare tunnels

Why would you need an expensive switch for CF tunnels??

It bypasses the switch and forms a tunnel directly to the machine and you don’t need to change any configuration on the switch

Both options can expose any service as long as the machine has internet

first your questions

Is the tunnel solution appropriate for jellyfin?

Yes but also no. the tldr is It will work, but video streaming is against CloudFlare rules. I ran this way for about 2 years with Plex just for my own use, so for about 15 hours a week on 480p and I never got my service suspended, but I’ve heard stories of others getting suspended… So just know it’s a risk

I suppose it’s OK for vaultwarden as there isnt much data being transfered?

That’s a good use of tunnels

Would it be better to run nginx proxy manager for everything or can I run both of the solutions?

You can definitely run both solutions (tunnel points to npm, npm towards to all other services), and it saves you setting up tunnels for each service

Now for my 2 cents

As others have suggested, tailscale funnel is a valid option. A reverse proxy using a VPS is also a valid option. And as I pointed out, doing the CloudFlare tunnel is an option if you’re willing to accept the risk.

My current setup is using a free Oracle VPS with a small nginx docker container forwarding all port 80 and 443 traffic through a tailscale. On the other end is a nginx proxy manager docker container that points to all my services across the network. I have my CloudFlare details configured in nginx proxy manager to generate a wildcard SSL certificate that I apply to all my local services

Inside the network, I use adguard to redirect the domain to the local LAN IP of the nginx proxy manager server to avoid traffic going through the internet.

Then all you need to do is point the domain on CloudFlare dns to the Oracle server, and you’ll have several layers of separation between the internet and your local LAN , as well as SSL certs both internally and externally on any services you share

It might not be the most elegant setup, but I share my Plex server (as well as about 30 other things) with several other people and can handle multiple 1080p streams going through it without any issue and it’s been nice and stable for over a year without any issues

I’m curious who is the arbitrator for what’s a valid security concern or not. If it’s done by an independent group, it might make it harder to get around. If it’s self disclosed, then yeah nothing will change

Glad you got it sorted

Samsung messages was using RCS since 2012… Years before Google messages adopted it.

There are others out there that use it but call it by different names like “advanced messaging”, “SMS+” etc

Google was the first to add e2e encryption and push it hard though, but if you send a RCS message from Google messages to Samsungs messages app, it won’t have e2e, and most likely will be the same with messaging Apple.

But given how much Apple have fought to make it hard (or at least inconvenient) to message between them, and shut down any apps that made messaging between Apple and Android better, this is a big step for Apple

It’s been a while since I used my resin printer, but I had a similar problem at one point and it came down to the support connection to the print… No matter how many supports I put, it didn’t change the outcome, but when I made the support thicker and made the connection point thicker, suddenly I had no more problems… It just meant a little extra post processing on some parts

31 days*

Many years ago I had a Facebook account under my real name, and they blocked it and told me to verify … I did everything they asked and they wouldn’t accept it… I recreated it under a fake name (very obvious it’s fake since it uses a celeb name) and have been using it for messaging a couple of friends for like a decade now with no issue

Well the reason I asked about the hotend was because of you’re using the little glass bead version of the thermistor, and the hotend has the hole to feed through, I had an issue on an old Frankenstein ender where it wasn’t touching the metal inside correctly… As it heated up, it would kind of move the thermistor away from the metal. I solved this by putting a DIY metal shroud on it that held it in the middle while touching the hotend all around. I also used thermal paste to make sure there was no gaps.

Here let me fix that for you

EU: demands changes to allow non-verifiable software

Apple: disagrees, but allows it does half assed job to try and make regulations look bad for its users

platform browser less secure

TheRegister: Damned Apple!!

I changed the thermistor “sensor type” from “EPCOS 100K B57560G104F” (same as the bed) to “Generic 3950”, no change.

What actual thermistor are you using?

Also since I’m half asleep and too lazy to read the previous posts to see if you listed it, what motherboard and hotend

That sounds like the start of a horror movie

It’s got romance, action, comedy, fantasy, safe for kids and families… Covers most groups

You can do this pretty easily using asterisk and then just point your VoIP clients to it’s IP address

But…

Whatever you do, unless you’re an expert with network security, don’t leave it on its default port if you’ll expose it to the internet.

You’ll have that many bots trying to get in that it’ll DDoS you within a few hours of setting it up. Even if you have it on a different port, you’ll have lots of bots trying to get in.

If you ever see those “unlimited international calls” cards sold in third world countries for like $5-10, those are mostly hacked VoIP systems that have accounts or access to a phone line

This looks great, I don’t suppose you plan on a pre-made docker container?

Given there’s no air holes he did well to get that close

It’s a shitty situation that’s causing mods and users alike a lot of frustration and might be a bit before it’s sorted.

Unfortunately I think this is something that will need to be dealt with Federation wide before it’s under control… But even then it’ll still add a lot of extra ongoing work to the mods of instances and communities just to clean up anything that gets through

It’s not just this community, or even just Lemmy… Mastodon and other Federation services all struggling with the same issue at the moment