I bought two refurbished 12 TB Seagate HDDs, installed one in my server, put the other in a USB adapter, plugged it into the server, and then let it rot there until I would eventually decide to tackle the burden of doing backups. Well, I decided that the time had come, but when I tried to mount it, I couldn’t find it. It is not detected using fdisk, but I can see it with dmesg, and it is stuck at Spinning up disk... (see [1]). But that is not all: the most frightening thing is that it makes very faint clicking sounds.
Do you think it is broken and I need to get a new one, or am I just missing something? Also, is this adapter bad, or why did it break while doing essentially nothing but sitting around? (The adapter is the SABRENT EC-DFLT-DE)
[1]:
[16073.604900] usb 2-2: new SuperSpeed USB device number 11 using xhci_hcd
[16073.617618] usb 2-2: New USB device found, idVendor=152d, idProduct=a578, bcdDevice= 1.00
[16073.617629] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[16073.617633] usb 2-2: Product: SABRENT
[16073.617636] usb 2-2: Manufacturer: SABRENT
[16073.617639] usb 2-2: SerialNumber: DD5641988396B
[16073.621358] scsi host0: uas
[16073.622070] scsi 0:0:0:0: Direct-Access SABRENT 4102 PQ: 0 ANSI: 6
[16073.624565] sd 0:0:0:0: Attached scsi generic sg0 type 0
[16087.663473] sd 0:0:0:0: [sda] Spinning up disk...
You must log in or register to comment.
Okay, so… Mechanical drive failure sucks. You may not be completely out of luck, though.
First thing to try would be throwing it in a bag of rice and freezing it. The rice is just to help prevent condensation. In theory, the contraction from the freezing temperatures can help with some physical clearances or something like that.
Now… Definitely try that before this next step. In fact, try literally anything and everything you can before this next step. It is a stupid thing to do and I should probably be downvoted for even suggesting it.
But… I had an early iPod with a mechanical hard drive which I thought was dead. I was saving up money to send it off to be serviced because the warranty had expired. It was sitting on the top of my dresser. A friend came over and knocked it off, he picked it up and showed it to me, booting up and running just fine. Some months later it started clicking again. I weighed my options, and eventually I dropped it on the floor on purpose, picked it up and held the power button, and it came on without issue. Some time after that, My laptop hard drive started behaving similarly. Guess what? Removed the drive, banged it against my knee or something, stuck it back in the computer, runs without issue.
I am still not explicitly suggesting this. Those platters inside are made of glass and there is a very, very small gap between the surface where the data is stored and the needles which are doing the reading / writing. You cannot do this carefully enough to ensure that you won’t shatter a platter or ram a needle into the metal substrate. But if you have nothing to lose… maybe some concussive engineering can help.
I love how, in the time it took me to tell that story, other people gave the same answer in a much more straightforward manner.
I am now trying the freezer trick and tomorrow I will have an update :) Btw, such a nice read xD I really enjoyed it.
Most platters are not made of glass. Usually it’s only the tiny laptop HDDs, which have not been used in new laptops for years. I’ve certainly never seen a 3.5" drive with glass platters.
I have a bunch of this specific line of Sabrent dock from different generations.
For some reason, some of them are super finnicky about certain high capacity (over 2TB) drives. What’s even weirder is that I have two identical enclosures purchased at the same time, and for any given drive one dock will be weird but not the other - and it’s not consistently the same dock either.
If you must use the disk externally, I recommend that you try another dock or enclosure. Probably not a Sabrent one, lol.
Im pretty sure its that drive enclosure, that POS killed a brand new drive in a week so I warrantied both and the replacement did the same thing.
I have 10tb server drives that sound like angle grinders at work when all 4 are working and in the beginning I thought something was wrong with them, but it has been 2 years and still all smart tests pass without issue.
So maybe issue with adapter, see if you can use a different adapter or plug it directly into pc or server
I’ve never had good luck with any of Sabrent’s USB drive enclosures lasting that long. The last one I had also stopped showing up and made the disk make weird clicking noises after a few months of just sitting there. When I took the disk out of it and plugged it into a computer via SATA directly, the drive was perfectly fine and had no SMART errors
Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I’ve seen in this thread:
Fewer Letters More Letters FCC Federal Communications Commission ~ (Iron/steel) Face-Centered Cubic crystalline structure SATA Serial AT Attachment interface for mass storage ULA United Launch Alliance (Lockheed/Boeing joint venture) Jargon Definition Starlink SpaceX’s world-wide satellite broadband constellation
4 acronyms in this thread; the most compressed thread commented on today has 14 acronyms.
[Thread #333 for this comm, first seen 3rd Jun 2026, 21:50] [FAQ] [Full list] [Contact] [Source code]
I bought a seagate once. Brand new. 250gb back in the days when that was a lot.
Brand new, put it into my computer, turn on my computer. It sees it just fine.
30 minutes later, my PC started reporting errors.
Dead. Seagate would not honor the warrenty. That was 2003. I’ve yet to buy another Seagate since.
I assume your drives are dead, just based on it being Seagate.
refurbished 12 TB Seagate HDDs
There’s your problem.
Yes and no, I only buy refurbs these days, so long as they work out of the box, they have been far more reliable than retail drives from a box store.
Definitely higher incidents of DOA drives, but the ones that work, have been pretty solid.
Still don’t trust spinning rust, so in addition to dual parity raid, I also have a full backup copy. But I no longer have reservations about refurb drives…
This. I buy used, not even refurbished, but I check the health as soon as I get it. I’ve had a few come in dead or dying, so I immediately get a refund or replacement.
