I am building a NAS in RAID 1 (Mirror) mode. Should I buy 2 of the same drive from the same manufacturer? or does it not matter so much?

  • wazzupdog@lemmy.world
    link
    fedilink
    English
    arrow-up
    5
    arrow-down
    2
    ·
    edit-2
    11 months ago

    If you haven’t looked into it, and if you already have the disks of varying capacity, check out JBOD. You will have to configure a system for backups however as you wont have parity like raid1

      • wazzupdog@lemmy.world
        link
        fedilink
        English
        arrow-up
        6
        ·
        edit-2
        11 months ago

        I’m aware, but raid 1 is mirroring which is redundancy, a jbod offers no redundancy so a backup would be even more crucial to protecting from data loss. Also i never said raid is a backup.

            • myofficialaccount@feddit.de
              link
              fedilink
              English
              arrow-up
              1
              arrow-down
              1
              ·
              11 months ago

              Don’t know myself as I have no use case for that setup, but it is a well known setup since several years. If teh performance was bad it wouldn’t be recommended as an alternative as often.

        • Possibly linux@lemmy.zip
          link
          fedilink
          English
          arrow-up
          1
          ·
          11 months ago

          Can’t you just format jbod with zfs or some other raid solution? I’m sure it depends on hardware but it shouldn’t be rocket science