I have recently repurposed and old Hp Stream to a home server and successfully run Immich. I really like it and even a small 500GB disk is way more than the 15GB Google offers.
My issue though is about backup. I would only be comfortable if all the data is backed up in an off-site server (cloud). But the back up storage will probably cost as much as paying for a service like ente or similar, directly replacing Google photo.
What am I missing? Where do you store your backup?
I use Backblaze B2 for my backups. Storing about 2tb, comes out to about $10/mo, which is on par with Google One pricing. However, I get the benefit of controlling my data, and I use it for tons more than just photos (movies/shows etc).
If you want a cheaper solution and have somewhere else you can store off-site (e.g. family/friend’s house), you can probably use a raspberry pi to make a super cheap backup solution.
If you have 1tb+ of data you can get a cheaper option just by moving to hetzner (also, even storj is cheaper than backblaze)
This is exactly what I was looking for last night, thank you!
Backblaze B2 is 6$ a month for 1TB and first 10GB is free. You pay proportionally (it cost me 2-3$ for last 7-8 months for 20-150 GB that accumulated over time). Keep in mind that you will spend more if you download backup, but you should use cloud backup as last resort anyway. I backup to 2nd local disk and also to B2 daily with Kopia. Didnt need backup fortunately, downloading from B2 small files ocasionally just for testing setup
Its not just cheaper, I love it because I dont have to deal with Gshit company
Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I’ve seen in this thread:
Fewer Letters More Letters LVM (Linux) Logical Volume Manager for filesystem mapping RAID Redundant Array of Independent Disks for mass storage VPN Virtual Private Network ZFS Solaris/Linux filesystem focusing on data integrity
4 acronyms in this thread; the most compressed thread commented on today has 4 acronyms.
[Thread #401 for this sub, first seen 4th Jan 2024, 18:05] [FAQ] [Full list] [Contact] [Source code]
I use backblaze on my synology. I backup photos automatically to it with their built in app on my phone, then every night I run encryped backups. I also could setup an encrypted backup to go to my parent’s synology.
My backup is about 900gb and costs <$5/mo. That is my music, pictures, movies, and TV shows. Obviously that will increase, but well worth the nominal coat to have that much backup encrypted and in the cloud.
Do you use B2 storage?
I do. And since I’ve been slowly taking back control over all my online stuff as much as I can, I’m very happy with it. It gives me peace of mind it’s secure and I am super unlikely to just lose it.
There was a good blog post about the real cost of storage, but I can’t find it now.
The gist was that to store 1TB of data somewhat reliably, you probably need at least:
- mirrored main storage 2TB
- frequent/local backup space, also at least mirrored disks 2TB + more if using a versioned backup system
- remote / cold storage backup space about the same as the frequent backups
Which amounts to something like 6TB of disk for 1TB of actual data. In real life you’d probably use some other level of RAID, at least for larger amounts so it’s perhaps not as harsh, and compression can reduce the required backup space too.
I have around 130G of data in Nextcloud, and the off-site borg repo for it is about 180G. Then there’s local backups on a mirrored HDD, with the ZFS snapshots that are not yet pruned that’s maybe 200G of raw disk space. So 130G becomes 510G in my setup.
I backup to a external hard disk that I keep in a fireproof and water resistant safe at home. Each service has its own LVM volume which I snapshot and then backup the snapshots with borg, all into one repository. The backup is triggered by a udev rule so it happens automatically when I plug the drive in; the backup script uses ntfy.sh (running locally) to let me know when it is finished so I can put the drive back in the safe. I can share the script later, if anyone is interested.
I have my Immich library backed up to Backblaze B2 via Duplicacy. That job runs nightly. I also have a secondary sync to Nextcloud running on another server. That said, I need another off prem backup and will likely run a monthly job to my parents house either via manually copying to an external disk then taking it over or setting up a Pi or other low power server and a VPN to do it remotely.
So you just mount the immich folder in the duplicate container? Or run it native?
Immich and Duplicacy both run on my unraid server. Duplicacy just watches the Immich pics folder and backs that up nightly.