Hello,

I was interested in building a high end printer, mostly for the fun of it and learning what goes into it. I’ve been looking at the Voron and on the page looks really nice; however, I’ve been unable to find a lot of actual print quality, speed, and capability comparisons.

Does anybody here have experience or recommendations of other high end, self build, printer designs?

I’d be using my customized printer based on the ender 3 max platform.

Really, looking to improve in a few areas:

  • proper enclosure and venting so I don’t continue to poison myself when printing abs.
  • elimination of ringing caused by that heavy bed swinging around at high speed
  • ability to ramp up the print speed past 50mm/s

I’d also love the ability to play with multi-matrtial printing, but not high on the list.

Thanks all

  • sarchar@programming.dev
    link
    fedilink
    English
    arrow-up
    3
    ·
    1 year ago

    I have experience with the Voron 2.4. I built mine a little over a year ago and absolutely love it.

    The V2.4 crew pride themselves on print quality. I mean, just look at what is required to be part of the PIF (PrintItForward) program. I can personally attest that print quality is amazing, and I have printed ABS, ASA, PLA, and PETG and had success with all. The enclosure can be built with easily removable clips so you can change from one setup to another.

    There are also tons of mods out, like the Nevermore, which would help reduce those bad air particles from printing ABS.

    I’ve heard of V2.4 printers reaching 300mm/sec print speeds. I usually run everyday prints around 80-150.

    If you want to eventually try multi-material printing, then you will want to check out the ERCF project.

    You should know that the Voron build process is maybe 1% of your work on this thing. You will be tinkering with ini scripts and print settings for years after your first benchy. For example, you’ll probably want to install the Klicky mod (or some other Z probe mod) and Auto-Z leveling. With QGL and Auto-Z your prints will start within roughly 0.02mm of the perfect first layer every time. But all this will take time to setup and configure.

    On top of all that, the Voron discord community is amazing. If you need help with a print issue, someone will help you.

    If you have any other questions, lemme know!

    • EmilieEvans@lemmy.ml
      link
      fedilink
      English
      arrow-up
      5
      ·
      edit-2
      1 year ago

      TL;DR: Don’t buy multi-material as a beginner.

      Long answer: Regarding Multimaterial: It’s not what you expect.

      Tried multiple systems in the past and they all had one common issue: Software.

      With bambulabs AMS popularity things might change but it’s janky at best. Mosaic pushed a head but in the process had to built their own slicer and as such breaking compatibility to other “experimental” parts/modifications.

      The crone could be toolchanger with one mixing hotend tool: Removing the burden of mixing hot ends while keeping the benefit. Neither do common slicer make good use of mixing hotends. Neither do CAD packages allow you to take advantage of mixing hot ends. They are historically built for subtractive manufacturing with additive features being added within the last 10 years. They still aren’t made for dynamically mixing multi-materials (one might call these software-defined materials) and given how bugged Autodesk Inventor already is this probably can’t be added at all. Building a new CAD package from the ground up is cost prohibitive. Meaning all the nice demos people show of are either specialized purpose-built software for exactly this product/shape or a clusterfuck.

      .

      Let’s talk fiction/future: E3D toolchanger and Prusa XL can do 5 tools. Let’s say 0,25 mm nozzle, 0.8mm nozzle, mixing hotend, DIN 562 (square nut) pick & place and milling spindle. As backend a filament bus-matrix (similar to what the AHB is for MCUs) with two pallet mosaic units within the path (and bypassed for e.g. flexible material) so any filament can be “routed” to any tool. This combined with a good toolchain could be a game changer. The one more thing.

      Truth is this is years if not decades into the future. Assuming it will turn into reality which would be a miracle. Slicer being able to automatically optimize for multiple nozzle diameters would be a first step. From there it should be simpler (2.5D CAM could be a roadblock). Once such a machine and toolchain exists adding a 4th and 5th axis would be the next step but that adds even more complexity to it.

      Worst case would be yet another round of patents blocking innovation/development of this technology for decades to come. Just like the initial Stratasys FDM patent had to expire before 3D-printing took off.

      • tenzen@lemmy.caOP
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        Thanks! I hadn’t considered the slicers. I don’t have a driving need multi-matrtial – mostly considering that if I’m going to invest in building a printer, I’d want it to be capable in all ways.

    • tenzen@lemmy.caOP
      link
      fedilink
      English
      arrow-up
      2
      ·
      1 year ago

      Awesome. Thank you for the reply. Sounds like it is time to start printing and collecting parts.

    • Daqu@feddit.de
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      Did you read the PIF article you linked? Does not sound too great.

      • sarchar@programming.dev
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        Fair, but it is worth pointing out that the PIF program aims for better quality. Boggles my mind why they shipped this set if it has such clear issues.