😌😌😌💥💥💨😰😫😵💫😤😡🔥🚀🚀🔥🔥💥💥💥☠️🫥✨🫣
😌😌😌💥💥💨😰😫😵💫😤😡🔥🚀🚀🔥🔥💥💥💥☠️🫥✨🫣
Hab ich eben auch schon wo anders gesehen. War erst der festen Überzeugung dass das ne Satire Seite war. Ich find's alles langsam echt bisschen sehr Doll.
The problem is more with zfs on consumer grade NVMes. I have/had problems in that configuration due to the bigger sector sizes. Proxmox itself does do frequent writes, but I don’t know how often exactly. I know that my problems went away with not using zfs.
https://www.reddit.com/r/Proxmox/comments/idlqh3/zfs_extremely_high_ssd_wearout_seemingly_random/
I wouldn’t suggest usb or sd-cards with proxmox due to its constant logging. You will fry them really quick unfortunately. Had that problem with NVMes.
For litterly anything else I would also suggest SD-Cards.
Hey, i have had the same trouble on an DL380 G9. Those bioses don’t support booting from PCIe at all. My server can’t even boot from drives from the Raid controller in IT-Mode.
I would suggest, by proxmox being a hypervisor, to just install proxmox on a single SATA disk and try to boot from there. This is what I have done in the end.
You can then use your NVMes as storage pool. Also you bifurcation can always also be a problem when trying to boot from those devices.
I would also as a last call try to disable bifurcation and see if one drive will show up. Maybe then you could use 2 real PCIe slots with cheap m2 to PCIe adapters.
I suspect nextcloud having performance issues with slow Disk IO. With rootless containers I had a much worse performance than rootfull. Also using MySQL Backend instead of SQLite did speedup the performance.
Nevertheless I have the same problems with nextcloud as you stated. Pretty much not as usable as I thought.
Ich hab bei meiner Mutter die TP-Link decos installiert. Die Kosten im 3er Pack knapp 100€ und haben bis jetzt ihren Job ohne Anstand gemacht.
Wäre das eine Option? Wäre Router/WLAN Mesh in einem.
Eine Option wäre noch dem Server mehrere feste IPS zu geben. Jeder der beiden Dienste kriegt ne eigene.
DNS sagt nur welche IP genutzt wird. Dem entsprechend wird bei http standardmäßig von Port 80 ausgegangen.
Ansonsten eine der Reverse Proxy Lösung der anderen Kommentare benutzen.
Unsere Diskussion hat sich fast nur um die kommerzielle Legalisierung vom cannabis bezogen. Luxemburg hat wie Spanien das ganze eher entkriminalisiert.
Handel und Abgabe scheint wohl immernoch illegal zu sein. Und genau darum ging’s eigentlich bei der Legalisierung.
Also ich hab mit Time Machine übers Netz relativ bescheidene Erfahrungen gemacht. Ich würde persönlich zu Ner Lösung tendieren die das eher direkt macht, aber das müsstest du vor Ort Mal testen.
Dumme Frage aber ist da der Grundstückspreis mit drin?
Weil das reine Haus bauen find ich auch nicht so relativ teuer mit meinem Stadt Einkommen.
Das Problem sind ja sogut wie immer die Grundstücke da seit Jahrzehnten mit denen spekuliert werden. Und am Arsch der Heide, wo das Grundstück billig ist, kann ich dir ne eidesstattliche Versicherung geben, dass das Medianeinkommen niedriger ist.
There are plenty of options, I will have to look up which are currently the best.
But I would recommend starting out with a normal “cube” like design. Delta printers seem cool but are not really beginner friendly.
To further ease the search I would look for a direct drive extruder. It’s easier to calibrate and you don’t have the hassle with potential problems regarding the Bowden tube.
Creality and Anycube are the goto brands for big community support, as far as I know.
Well because of money. You certainly have to pay to get Ubuntu certificated. And you only do this to have a Linux system with support from the manufacturer.
It’s an enterprise problem with an enterprise solution.
The normal personal systems are not in the same segment.