First time printing with TPU. Another problem I had was that it didn’t stick to the textured print bed, had to go for smooth PEI which I read (and now can confirm) is not ideal. Would satin be better?

  • MrSlicer@lemmy.world
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    Not necessarily. If you don’t hear any sizzle like little pops when extruding you are fine.

    Also watch out for retraction amount and speed. You don’t want more than 1 or 2 mm of retraction at 15mm/s and try to only print that slow as well.

        • TwanHE@lemmy.world
          link
          fedilink
          English
          arrow-up
          1
          arrow-down
          4
          ·
          1 year ago

          All depends on your extruder. A decent extruder should have no problems with 200mm/s+

            • TwanHE@lemmy.world
              link
              fedilink
              English
              arrow-up
              1
              ·
              1 year ago

              Just because you can’t get it working doesn’t mean it’s impossible. Vez is printing tpu benchys under 6 minutes, so it’s clearly possible.

              • MrSlicer@lemmy.world
                link
                fedilink
                English
                arrow-up
                0
                ·
                1 year ago

                I don’t know what you are talking about. I make real things out of tpu that get used everyday for years. I don’t know who pez is and I’m not interested in bench speed runs.

                • TwanHE@lemmy.world
                  link
                  fedilink
                  English
                  arrow-up
                  1
                  ·
                  1 year ago

                  I get that speedbencys aren’t functional objects but as long as you’re not running out of flow rate the material properties shouldn’t differ between 20mm/s and 200