I sometimes use a snap

My work machine isn’t too unusual, apart that it has 52 USB devices connected. And here’s something you may not know: Linux can’t enumerate more than 16 USB ports if the root is configured as USB3, so I had to force all the ports to run in USB2 mode - which is fine in this case, since most of them are serial ports.

Lenovo support seems to think I have an unusual setup since I run Linux on their Thinkpad & while the NVMe even after an RMA fails under heavy IO despite their partner WD, who sent me an email response saying they never test or certify drives for Linux or BSD. Many users have been experiencing similar failures with their controllers WD proudly boasts as in-house. Note that Lenovo also has a support PDF about running the device on Linux, but the support is ran by a bunch of clowns. Also not that when you purchase, the hardware brand is never mentioned so there is na room for due diligence.

Tl;dr: if you want a working Linux system, don’t purchase Western Digital or Sandisk drives.

Not mine, but while I was an intern for a lab I enjoyed using a very normal-looking desktop with a casual 4TB of DDR4 and no SSD or HD, dual Xeon configuration. Rather, it did network boot and pivot root into an in-memory filesystem. It had a UPS and typically ran for months entirely from volatile storage and was used to run experimental photo and video processing. This was about ten years ago.

Gentoo gaming and music production rig working through mostly tty with dwm as a graphical display. I typically stay on tty until I want to play a game, use modern web, or record a song. Otherwise tty with Links browser.

Both servers were running musl libc instead of glibc for a while. This gave me a couple of random issues, but eventually I got tired and switched back to glibc.

musl in a nutshell

I’m running a distro named Navigatrix along with softplexer Muplex and chart plotting software called OpenCPN. I’m using two USB GPS pucks, and an RTL-SDR for VHF AIS transmissions. Muplex will take data inputs from all three NMEA protocols (onboard nav data from appliances/radios (I have Simrad & Icom products)), GPS data, AIS data and pipe it around to whatever laptop or tablet I have on hand, and can even use GPS data, over Bluetooth/wifi/cable from a phone as backup. All connected through a small GL pocket router.

I live off grid on a 29’ cruising sailboat, currently in Miami for Ultra (disappointing) making my way to Colombia.

Well my unusual setup I spent years thinking about it before I was even able to have the money to achieve it. It’s based on portability and versatility and since I’m now working remotely now it makes even more sense. The plan was to run something portable with less power and smaller when outside, and leave the powerhouse to be accessed remotely. So for that reason I have a dualboot Oneplus 6 with LineageOS and Droidian, Waydroid container on Droidian and Debian proot-distro on LineageOS. That so i dont have to totally reboot for some tasks i might need on android or linux. 4 media folders shared between both of them as well as their containers. This makes sense now cause i long thought of running a Lapdock with it even if only wireless, and I got it recently! It works really nice on android but cant transmit over miracast on linux yet, still figuring that out. Nevertheless thats not the main device that is on my mind. A pinephone pro is a good fit too, but im leaning towards something like the gpd pocket 3, a real portable and modular mini pc that could be connected with just a cable to work better on the lapdock (also can be used as a tablet which is dope).

The powerhouse itself is a server with 16 threads of cpu and 64gb of ram and 2 gtx 1060s for graphics that i plan on configuring with vgpu to split graphical load between the vms with. It is also my remote gaming server :D with moonlight and sunshine, and i spent quite some time configuring all of it to be easily almost plug and play with controllers to have no issues if i disconnect or using multiple different controllers, with a good game launcher (Playnite) to host all games from it.

All of this just to someday achieve my dream of working wherever I want with a camper van to explore the world!

i have a single box i use for data storage; backup; wifi; router; and switch.

it runs ubuntu on the bare iron with

• a windows 10 kvm/qemu vm with pci pass through on wifi to get 1 gig wifi speeds on intel in ap mode (intel won’t allow it using linux drivers)
• a pfsense kvm/qemu vm for router & firewall to internet and with pci pass through on a 1 gig nic to gap the internet from the base ubuntu
• dns & ip masquerade along with kvm/qemu based sofware defined networking for windows, pfsense and ubuntu to forward all wifi and cabled network through to internet and
• connected via 3 gig nic and switch for much faster local data storage and backup on the ubuntu install.
• vpn and remote backup using pfsense for access to my setup from anywhere else in the world. (eg routing traffic from the office to my home connection for personal use and access to my data)

topographically, it looks like this, but in reality it’s all one box:

                              ┌────┐                    ┌─────────────┐                             
          ┌───────────────────┤vpn │ ┌──────────────────┤windows (wifi│                             
          ▼                   └────┘ │                  └─────────────┘                             
┌──────────┐                         │                                                              
│ internet │                         │                                                              
└──────────┘                         ▼                  ┌───────┐        ┌──────┐      ┌───────────┐
          ▲                ┌─────────┐                  │ubuntu │◄───────┤switch│◄─────┤  backups  │
          └────────────────┤ pfsense │◄─────────────────┴───────┘        └──────┘      └───────────┘
                           └─────────┘                                                              

I think my most unusual step os to select dvoark keyboard layout. Otherwise I’m pretty vanilla.

I use Wayfire (which not many people use for unknown reasons), and one of the things I like to do with it is have a fiery drop-down Kitty terminal. :)

I haven’t seen anyone else do a drop-down Kitty in Wayfire before, so I’d like to boldly claim I’m the first one to do so. :) Yes I know it’s pointless, but it’s also cool, and it’s fast thanks to being fully GPU-accelerated, so why not?

And no, I don’t use the fire effect for other windows - that’d get real old, real fast. Thanks to Wayfire, I can define window rules so the effect only applies to my drop-down kitty. Also, my regular kitty windows open normally, without any fancy effects - and it’s possible to differentiate this thanks to kitty allowing you to specify an custom appid.

I also use doas instead of sudo. I just got tired always fighting with sudoers, doas is so much more easier to setup and work with.

Finally, I use grc to colorize all my log output. Makes my journactl looks nice. :)

Oracle cloud VM (free tier)

Remember to back that shit up rigorously, as Oracle is known to terminate free accounts with no warning (…which is fair for a free account imo)

You probably already know this but I thought I’d say it just in case

I use Parabola GNU/Linux-libre.

I read through all the comments and its both glorious and frightening. My setup probably is the most vanilla in here…

• Debian 12 + KDE on my daily for work, play and streaming
• Pop_os on asus a15 with 3070m
• Ubuntu Server on an old xeon 4 core which runs many services (plex, homeassistant, pihole, etc)
• LibreELEC on pi4 8 GB connected to my dumbtv in the bedroom
• Ununtu Server on a VPS running 4 fediverse services (lemmy, mastodon, peertube and matrix) a wiki, a forum and surrounding stuff

Probably only the amount of different things is a bit different, otherwise I‘m quite risk averse.

Thanks for reading. Have a good one!