Misleading title: SIEMENS Mobility is looking for said Windows 3.11 admin. NOT the German Railway
Deutsche Bahn is the circus and Siemens in this case the clowns.
Clown Siemens, you say?
If the system can’t run perfectly on its own by now… I can teach them how to play the snakes game on it.
Ooh, someone is about to make BANK!
Some retired old fart who can’t be bothered to learn fancy-schmancy Web 2.0. Rock on like it’s '93
Or a middle-aged fart who did learn new stuff but remembers the old stuff too
Web 2.0 was a mistake.
They’re gonna party like it’s 1989
Celebrating Ceaușescu’s death? /j
Why would someone make a lot of money from this?
Supply and demand. The people that have a lot of experience with those systems are retired or should be retiring soon.
Supply is pretty low. So they can demand higher pay.
DB’s demand is pretty strong. If those systems go down, trains don’t run, and that costs them millions.
It’s cheaper to pay someone a lot of money vs having their systems fail.
Legacy hardware and operating systems are battle tested, having been extensively probed and patched during their heyday. The same can be said for software written for these platforms – they have been refined to the point that they can execute their intended tasks without incident. If it is ain’t broke, don’t fix it. One could also argue that dated platforms are less likely to be targeted by modern cybercriminals. Learning the ins and outs of a legacy system does not make sense when there are so few targets still using them. A hacker would be far better off to master something newer that millions of systems still use.
Tell me you know nothing about cybersecurity without telling me you know nothing about cybersecurity. Wtf is this drivel?
Simple solution: Don’t connect it to the Internet. Hackers hate this one weird trick.
And said trick ends when an attacker manages to socially-engineer their way in. (But maybe they’ll drop floppies instead of flash drives around the block this time)
You really think that infrastructure IT is dumb unless it can brush off a Stuxnet-like attack by the CIA and Mosad? Most RR traffic signals in the US are run with mechanical logic, physical switches connected to circuits closed by steel wheels on steel tracks. Do you really want a “move fast and break things” tech bro to update all this stuff for us?
All kinds of infrastructure uses ancient software because it’s reliable. Updating it just to protect from hackers causing damage is likely to cause that damage unintentionally while doing little to protect from hackers anyhow.
It must be updated sometime or risk being archaic and unmanageable. Chances are high they are paying insane amounts for those legacy mechanical switches you mention.
The actual logic is usually very well portable to a more modern ecosystem.
They could socially engineer their way in regardless of some machine being MSDOS or not. Basically if they can gain physical access to the device, or convince somebody to do something with the device it hardly matters what it was running since it can still be compromised.
It really depends if these systems (that appear to control arrival boards) are on a network or not. If they’re not, then there is minimal risk to leave them the way they are. Somebody would need physical access to the devices to do harm. If they are on a network then that’s a pretty big deal, but some attacks could be mitigated against by tunnelling and/or additional packet filtering to ensure the integrity of messages.
Continuing on a railway theme you should be FAR more worried all the devices that run up and down the side of railway lines - PLCs that talk with each other and operations centres to control things like lights, junctions, crossings etc. If they’re more than 5 years old then chances are then all that traffic is in the clear, and because these things live in boxes by the railway line, it wouldn’t take much to break into a network and potentially kill people by running two trains into each other.
the job was advertised as being remote…
The job might be remote, doesn’t mean the system is remote. For all you or I know they want somebody to reverse engineer the protocol of this thing, which could be some weird board & driver that hooks into an old PC so they can switch it out for something else.
It’s in the job description, remote access is available via a repurposed laparoscope robot and webcam placed in front of the original terminal keyboard and CRT
Exactly. And these things are on an internal bus network, but they are not connected to the internet.
Cybersecurity != Safety Critical
It is when safety-critical systems are the target of a cyberattack.
Doesn’t sound like this system is safety critical. You should be more worried if some hacker can change train signs from stop to go. If you ever ride on a train and see steel boxes by the side of the track, those are control systems and they run up and down the line. They might be locked, or possibly alarmed but that’s about the extent of their protection. A simple attack would be to just take an axe to one, or set fire to it. A more sophisticated attack could snoop on the profinet traffic and do something evil.
they can execute their intended tasks without incident
Now if only the Deutsche Bahn could do that too
The author’s rammar isnt that great as well. Those typos can be should have been catched easily by the spellcheck.
The author’s rammar
Finally caught a *grammar cop doing a typo in the wild. Pure joy.
“catched”
can be should have been
Yeah, Techspot is pretty trash
We’re maintaining and developing OpenVMS OS, and both we and our customers need Cobol, Fortran, and other half-dead languages coders.
Many large companies maintain their old systems and use them for production or data processing purposes. Sometimes it’s too expensive to migrate off, but im many cases “it just works”I’m a COBOL developer. For old COBOL systems it’s not just a case of it being expensive to “migrate away”, it’s extremely risky and for no significant benefit.
Businesses have essentially two options, modernize what they already have, or tear everything apart and start from scratch. COBOL programs don’t “just work”, they’re good at what they need to do (business transactions). Therefore, there isn’t a significant need to rewrite everything, especially when it’s possible to modernize and reuse existing business logic contained within COBOL programs. For example, COBOL programs aren’t tied to old hardware, you can run your COBOL applications on the cloud instead. This is much safer and cheaper than rewriting everything.
I work primarily in a Long Tail language (languages don’t die, but they have a long tail where usage slowly creeps away). I tell the business that we could ultimately solve all the problems with the platform except for one: finding new programmers to hire for it. That’s what will ultimately force us to migrate. Doesn’t have anything to do with cost or ability to take on new features or handle new ways of doing things.
When it comes to COBOL developers, there are a lot of developers retiring but there are also a lot of programmers being trained in COBOL every year. It’s for this reason that the average age of COBOL developers has stayed roughly the same for the past 2 decades despite retirements.
But that said the total number of COBOL developers is decreasing overall, which is an issue.
Not many young programmers want to learn COBOL. COBOL isn’t taught in many educational institutions. There are very few online resources that programmers can use to self-teach COBOL.
It’s a shame. COBOL is great for it’s specific use case but it isn’t very “accessible” in that regard when compared to other languages.
I feel this way about mainframes sometimes too, I had a class in mainframes but we weren’t really taught about job options or where they still fit in the industry.
Isn’t pretty much all airport scheduling based off software from the 80s or something?
Edit: Found a video about it.
Probably! APOLLO and SABRE and stuff look ancient.
Why change what isn’t broken, right?
That’s the thing though, it is.
I’ve worked in that area. It was broken back in the 90s and I doubt the crusty old parts of the system have gotten any better. I was tasked with writing a more modern wrapper for part of the legacy system, and when I asked for documentation I was told they had literally nothing to give me.
I was just an intern at the time so maybe someone with more clout could have gotten sometime to dig in a forgotten closet for old technical docs, but it still strikes me as a very bad sign when technical docs for a system every agent uses all day every day aren’t immediately available on the company’s intranet.
I know for sure several airports are using OpenVMS, and there are more we don’t know about, as some companies keep running yheir stuff for decades not asking anyone for support.
And I’m sure There are multiple other old systems out there, it’s too hard to replace them.
And they work! Our VMS stuff runs great, it’s fast, and the uptime is measured in decades sometimes. So the problem is hardware: we rolled out the first production x86 version this year, so our users are fine (it’s still an issue of porting your software, but it’s not as terrible as building everything from scratch), but before that OpenVMS could run on Itanium servers at latest, and the platform was dying off since the beginning of 2000s, so it is a problem to find a normal replacement machine now.
And in many cases if it gets replaced it’s for a system that looks fancier but actually has more problems than the original… See Phoenix for the Canadian government employees pay.
I’ve seen those postings and some executive is living in dreamland thinking they can hire someone to do that for $25/hr.
My bosses tried to ask me if I knew anyone the could hire for a full time position at a hospital. I ask for more details and eventually they relent because they aren’t having any luck on indeed/craigslist/temp recruiter.
It’s a 24 hour on call position for ‘up to’ $55,000 to be the sole IT staff for a 100 bed hospital in upstate NY.
I literally laughed at them, but they seem to insist they are gonna find someone to take the job.
I actually think the job isn’t even legal as described.
Hahahaha, what a joke.
Sorry, not interested in 24hr on call until they start talking $100k+. That’s asking a lot of someone.
Sounds like they need multiple staff, actually. You can’t do on-call without having a rotation. What happens if Bob gets hit by a bus? This tells me all I need to know about them. Typical SMB “leadership”, they lack any concept of managing systems - be it IT, finance, mechanical, whatever. All systems have their management models.
Fucking delusional pricks.
With those requirements I would expect $500k with 6 weeks paid leave. What a bunch of clowns.
You mean I can use my decades of Fortran knowledge somewhere?! If I could get a wfh position in about 3 years, that’d be awesome.
If you actually do have decades of fortran experience, work for NOAA. Their weather models are mostly fortran and they need engineers. Specifically the NOAA EPIC contract that i worked on previously definitely needs people knowledgeable in fortran and was 100% work from home. Feel free to DM me if you want more details.
Such things make me angry. LoL
It can be viewed as a success. A bridge or building that only lasts five years wouldn’t be considered successful, especially if it took monumental effort to make it in the first place. For some reason, we don’t value that in software.
I wrote a Classic ASP app in 1999 that placed a web UI atop a mainframe application that dated to the late '70s and allowed easy navigation of really enormous data structures. I learned last year that it’s still in use at that company; amazing not just because my code is still around but because that fucking mainframe code is still running.
both we and our customers need Cobol, Fortran, and other half-dead languages coders
Visual Basic? (fingers crossed)
Oh, I’m sorry man. I don’t know everything, I’m working there less than a year, but I only heard of VB a couple of times. In order of popularity it’s like: C, C++, Java, then everything else
I was just kidding - I haven’t touched Visual Basic in almost 20 years now. I’m not sure I could still code in it even if I wanted to.
Do I get to move to Germany for this?
You might, actually. Provided there is no available EU applicant.
There are probably many people in Japan with this skillset given that they’re only now getting off disks for certain government processes.
There’s lots of people all over the world in their 30s and 40s and older with this experience.
AND you get to enjoy the DB Verspätungen all the time! Possibly even cause them!
Imagine both the annoyance and job security having to manage MS-DOS and 3.1 systems for a railroad would entail.
I would love it so much. I’d feel right at home. I miss sitting in my room and learning everything I could about DOS. That was the best time I ever had with computers.
I once built, setup, and maintained about 20 computers for a Christian school for free just because I loved doing it so much.
I wish I still had that enthusiasm for tech.
Better hope those systems are not network enabled
They’re probably still running on their own Netware network. Is there still Win16 compatible malware going around?
If it’s in a current metasploit package you can be sure that someone is scanning the IP at some point.
own Netware network
Johnny Castaway can live on at least.
Don’t forget MOPY ;)
Hey, I have a wall-mounted tablet that runs Johnny all the time. My 5-year old loves him.
So say we all.
Eternal September
Those where the days! <3
They still can be!
Reminds me of the lessons from Chad Fowler’s talk on “Legacy”. https://youtu.be/P4xSmYr7PEg
Here is an alternative Piped link(s):
https://piped.video/P4xSmYr7PEg
Piped is a privacy-respecting open-source alternative frontend to YouTube.
I’m open-source; check me out at GitHub.
If it ain’t broke, don’t fix it.
Until it becomes obsolete, unsupportable, the crux of your operation, and/or the basis for all of your decisions 😬
(Yes, I read the article, it’s just the signs, but yes, the above still applies!)
COBOL has entered the chat
e: good for legacy employment though. A relative of mine is a Z80 programmer by trade, and he can effectively walk into a job because the talent pool is so small now. Granted - the wages are never great but never poor, and the role is maintenance and troubleshooting rather than being on the leading edge of development - but it’s a job for life.
Every time I hear about COBOL I feel like I should try to learn it as a backup plan…
I’m in two minds about that. One the one hand, yes, of course - as all the original COBOL folks die off, the skills will be even rarer and thus worth more.
On the other hand, if we keep propping up old shit, the businesses will keep relying on it and it’ll be even more painful when they do eventually get forced to migrate off it.
On the other other hand, we know it works, and we don’t want to migrate everything into a series of Electron apps just because that’s popular at the moment.
Part of the problem is the cost of moving off it. Some companies simply can’t pay what that would cost, and that’s before you consider the risk.
Tough spot to be in.
You have to unlearn everything you know to learn it, go look its bad.
No you don’t? What are you basing this claim off?
Let COBOL die, it’s terrible.
If it works, why would we want to go through the trouble of switching to another language that will also eventually be regarded as needing to be retired? There’s decades of debugging and improvement done on their system, start over with a new system and all that work needs to be done again but with a programming language that’s probably much more complex and that leaves the door open to more mistakes…
In what way is it terrible?
🥲
Not to mention when you want to change the entire system it becomes a huge operation and problem.
Massive risk to that change too.
So many people don’t understand how risk informs everything a business does.
What cost is there to a given system being down for one hour? A day? Any regulations around it?
Often it’s better to pay a known quantity up front than risk potential outages where you can’t predict all the downstream affects.
I’d consider those various states of not working. So… Don’t fix it if it’s not broken!
Too critical to be upgraded is something I wish I’d never hear or see again in my professional career.
ha, whats the failover look like???
Manual and boot a machine with the same IP somewhere else. Very robust
Oh, everyone who ever travels by train in Europe will tell you that the German infrastructure is very much broken. You’re lucky if your delay is less than a day travelling through Germany.
Well I live in germany and therefore use the train network on short and long distance frequently and while it is unreliable, “a day” of delay is something I have never experienced.
Most of the delayed trains are late by less than one hour (still atrocious, but not a day’s worth by any means).
I actually experienced only once a situation where we were given the choice of a hotel or a continuation of our travels by taxi (which we chose) because the train we were in was late one hour or something and the other (last for the day) train could not wait.Well, it’s based on experiences travelling through Germany proper - for example Denmark to France or Italy, including transfers. Often the delay will just be a couple of hours, but then you miss your transfer and you’re screwed.
Also if you’re on your way to Switzerland the Swiss have no patience for disruptions in their services, so if a train is delayed coming from Germany they’re likely to just not accept it into the country at all.
I have also heard from people who were told to spend the night in the train, which DB just parked in the outskirts of the city for the night. That way they could offer passengers a place to sleep in the cheapest possible ways. Pregnant women or families with young children were asked to check in to hotels.
Afaik Deutsche Bahn loses 5 mil a day: https://www.theguardian.com/business/2023/oct/14/its-the-same-daily-misery-germanys-terrible-trains-are-no-joke-for-a-nation-built-on-efficiency
Germany doesn’t really seem like a very efficient country, they still use fax for things and every person has to manage like 10,000 different insurances for everything. Seems like an old (and inaccurate) ww2 trope.
It’s mostly a misunderstanding of what is valued in German society. The common trope is that German society covets precision. This is not the case. German society covets unwavering precision in the adherence to norms. To the point where innovation is akin to revolution in the negative sense, and pigheadedness in procedure is considered a workplace virtue. In the mean time nothing gets done. Source: expat in Germany.
Source: expat in Germany.
Is this the same as a migrant?
Yes, as long as they’re also white and middle/upper class!
No, the way it’s often used is closer to “posh guest worker”.
deleted by creator
Migrant implies the non permanent kind because a permanent migrant is referred to as an “immigrant”.
What’s the technical difference between a migrant and an expat?
I believe the difference is that an expat moved there non-permanently, while an immigrant moved there permanently
Though if I ever somehow became an expat, I wouldn’t use the word because of how people associate it.
Immigrant = Someone who has moved to another country permanently. Migrant = Someone who has moved to another country temporarily.
Expat is often used by western migrants who don’t like the word “migrant”.
I take issue with it because people classify an Indian doctor moved to the US as a migrant but an American doctor eho has moved to Europe is an expat.
What you call an expat is a temporary immigrant. “Expats” fill immigration forms in their country of migration, not expatriation forms. Politicians pass laws that govern immigration, not expatriation.
That word is meant to differentiate rich (and white, often) workers from the poor, because “immigrant” has a negative connotation. That’s why I take issue with it.
The truth is, the poor might be temporary migrants too (cf Pakistanis in Dubai). The media still uses the word migrants for those. We don’t know if they’re “expats” or not, we just assume because they’re not rich or white enough.
Quick disclaimer here: I’m not saying you are racist for using the word. I just wanted to explain why I react so strongly when I hear it.
No it’s just about moneymaking and education level. If you’re a foreigner and highly educated and get a good paying job like IT consultant or doctor, you’re an expat. If you’re low educated and get a low paying job like construction or factory or no job, you’re a migrant. One is liked more than the other, hence the difference they make. The first doesn’t speak local language, but does speak English, and few people care. The second doesn’t speak local language and no English and is disliked for it.How long you stay is not very relevant. AfD doesn’t hare expats as much as other migrants, for example…
As an outside observation, Germans seem to make things better than they need to be in a detrimental way. For example, we redid one of our bathroom showers using the Schluter Kerdi waterpoofing system. They have very specific instructions on how to space the screws, how to seal the screws, how to seal the edges, how to mix the thinset, and probably some other things I can’t remember off the top of my head. They put it through a battery of tests, including going under 100’ of water. Who needs that? Don’t worry about it.
This stuff replaces cement board, which isn’t strictly waterproof, at least not on its own. It’s also significantly more expensive.
I do think it’s worthwhile for a home DIYer to get. The instructions are clear and it’s less likely you’ll screw something up that could result in disaster. That said, this thing is just waiting for a Japanese company to come along and make something 90% as good for 50% of the price. That’s basically what happened in the German vs Japanese car market, and there’s already some products on this market like that.
An old mechanic friend of mine used to say “German cars are over-engineered and under-designed”, lol.
Having worked on every brand of car out there, his description, and your explanation make a lot of sense together.
I’ve never seen such a clear and concise comparison of German/Japanese manufacturing, you really nailed it.
Both approaches have their place, the key is to know when to apply them.
Also bureaucracy is through the roof in everything, i have no idea who the fuck thinks of germany as efficient.
I have no doubt their bureaucrats perform world-class efficiency in their handing out, filling in, faxing and archiving a sophisticated system of paper forms.
I guess it’s the trap of getting complacent and stopping modernizing as soon as you’ve convinced yourself you have the best system in the world.
It’s more that the bureaucracy is so complex and fragmented that it’s incredibly hard to digitalize. Lots of small fiefdoms that are entitled to make IT purchasing decisions themselves means paper is the only universal interchange format. In addition there is an unwillingness to change how things have always been done, or to simplify procedures. So there you have it: The German bureaucracy is too fat to move.
I work for german government agencies from time to time and they are working on it… It’s just really slow because there is so much of it, and due to organizational overhead. Also, there is not a single push for the entirety of Germany, but some things everyone does for themselves.
He’s actually German.
German re-unification cost trillions. It’s entirely unsurprising.
That’s another part of the infrastructure, though: We just don’t have enough rail as well as backup rolling stock.
And as the federation finally decided to spend some money it’s going to get worse in the next decade or so due to outages due to new constructions being linked up to the old stuff.
As to the age of the infrastructure – I mean it’s the railway. If a rarely-used branch line still uses mechanical interlocks and there’s no need to upgrade the capacity then the line is going to continue using infrastructure build in the times of the Kaiser. It’s not like those systems are unsafe, it just might be the case that unlike in the days of ole those posts with a gazillion levers aren’t manned all the time so you’ll see an operator drive to it with a car while the train is on its way. Which really isn’t that much of a deal when the branch line goes to a, what, quarry maybe sending out a train every two months or so. Certainly better than to demolish the line and use trucks instead.
Is it broke if no one is able to fix it?
The reason for it to run on such an ancient device is because nobody wants to touch the scripts running on these devices.
A lot of these systems are also always on.
Used to work at an airport that had a similar issue, turning some of these systems off simply isn’t possible. So you end up having to run the replacement system simultaneously with the old system for a few days. Can’t simply take it off line for a day.
Running two systems simultaneously for a couple of days, that’s a huge problem, not solvable
Could be good money in this because who wants to do this… :)
I know a guy fitted for the job. He’s well versed in MS-DOS, Win 3.1, 3.11 etc. Hell, he’s even fluent in German, but he’s due a hip and knee replacement this month…
That’s all I’m gonna say.
Good luck with the robot joints!
It’s the only way to keep the trains free from cylon interference.
Battletrain Deutchlandica
10/10 would install Doom on it.
Play doom with physical rails and trains
